DURAVENT

Decorative cover for ceiling support boxes and wall thimbles. Painted black. Use with reduction collar.PellentVent Pro Info:PelletVent Pro is a versatile venting system specifically designed for...

The PelletVent Pro 3" Wall Thimble Air Intake Kit is a comprehensive solution designed to ensure efficient air intake for your pellet stove. This kit includes a 2" flexible pipe, facilitating easy...

Use to attach to appliance outlet allowing for easy pipe connection. Allows connection of 4” vent to 3” appliance outlet. Seal adapter to appliance with high temperature sealant.PellentVent Pro...

Use to connect PelletVent Pro to the bottom of BioFlex when relining a masonry chimney. Only approved for use with BioFlex.PellentVent Pro Info:PelletVent Pro is a versatile venting system...

Use to transition between PelletVent Pro to existing chimney such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble, for 6”,...

Use to transition between PelletVent Pro to existing chimney such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble, for 6”,...

Use for a 90° offset. Attaches directly to appliance as an adapter. Converts a 3” appliance to a 4” PelletVent Pro system. One piece unit incorporates removable twist-lock Clean-Out Tee Cap...

Fits over the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble...

DirectVent Pro features tight interior connections for superior performance, with no gaskets or sealants needed (unless specified by the appliance manufacturer). All black pipe lengths, extensions,...

This Roof Flashing is made with Dead Soft Aluminum and used to weather-proof DuraTech chimney pipe that extends through the roof. Select the appropriate roof flashing based on the roof pitch, and...

This Roof Flashing is made with galvalume, and used to weather-proof DuraTech chimney pipe that extends through the roof. Select the appropriate roof flashing based on the roof pitch, and purchase a...

Use these Wall Straps for interior or exterior installations to add support for DuraTech pipe runs! These wall straps are designed to provide 2" - 6" clearance to combustible walls, as well as fit...

These DuraTech Termination Caps are required where pipe terminates above the roof line. This Termination Cap easily twist-locks onto the end of DuraTech chimney pipe, allowing for quick removal and...

Use to add length to a straight length piece of Type B Gas Vent pipe, to ensure the exact required vent length can be achieved.  It allows for easy disassembly and can absorb the linear expansion of...

The Adjustable Oval Insert Boot is made with 11 gauge, carbon steel. It is used to connect inserts with rectangular flue outlets up to 6" x 16 ½" with oval flex connectors. The two-piece design...

Use these Adjustable Tee Support Brackets for up to 50’ without straps, or 70’ with straps for DuraTech chimney pipe. These brackets adjust to provide 2" - 6" of clearance to the wall. These supports...

Features fully unitized, twist-lock construction in 3” and 4” diameters. Listed at 1” clearance to combustibles in the USA and Canada. It can be used in both vertical and horizontal...

These Trim Collars for Roof Supports conceal the gap between the DuraTech chimney pipe and ceiling cut-out when a roof support is being utilized. These trim collars are made with galvalume, and come...