DURAVENT

The PelletVent Pro Attic Insulation Shield prevents insulation from accumulating near vent piping and is required for installations that pass through an attic. Provides 1" clearance to combustibles...

The PelletVent Pro Cathedral Square Support is used to support the pipe while providing a protective passageway through the ceiling. I can be used on flat or cathedral ceilings. Includes a support...

Constructed with durability and reliability in mind, the DuraTech Galvalume Elbow Strap is an essential component for effective chimney support systems. Designed specifically to alleviate stress...

Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have one pair of elbows if needed. Offsets greater than 30° are not permitted in accordance to UL 103...

The DuraTech Storm Collar allows the installer to safely and easily connect and disconnect chimney sections. No locking bands required. Required with DuraTech flashing to create a...

The Chase Top Flashing is made with galvalume, and encloses the top of the chase while providing a ventilation air passage. This product is UL listed, includes spacer clips, and requires a Storm...

Elbow Kit includes: 2 Elbows and 1 Elbow Strap. Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30°...

The Firestop Radiation Shield is required for ceiling/floor penetrations when a ceiling support is not used, but is not required for passing through a roof. This shield fits on the ceiling side...

Elbow Kit includes: 2 Elbows and 1 Elbow Strap. Use for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30° are not...

The Attic Insulation Shield is required for installations when DuraTech passes through an attic. It prevents insulation from accumulating near the chimney, and fits over a Firestop Radiation Shield...

Use to provide support for offsets and horizontal runs. Recommended every 4’ to support vertical common vent. Use also with DuraConnect or DuraConnect II. 10” Type B gas vent (11” OD) uses a 7”...

Stainless Steel Mesh is the best option for chimneys with decorative stone or brick tops where you cannot install a traditional chimney cap. The mesh is made of heavy duty 18-gauge stainless steel...

Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. The damper is pre-installed on this adapter.DVL Additional Info:The DVL Double-Wall Stovepipe System is designed to complete...

DVL Stove Adapter connects DVL pipe to the appliance flue outlet. DuraVent DVL is a double-wall interior stovepipe for connecting woodstoves to a manufactured chimney. DVL's double air insulated...

Use for a two-piece installation from stove to ceiling support box or finishing collar. Available in 29” - 46” and 40” - 68” extensions. No cutting required. DVL Additional Info: ...

Use to add length to DVL pipe. 6” pipe adds 2” - 5” of length, 12” pipe adds 2” - 11” of length, when used with rigid sections of pipe. 12” section can be ovalized for oval-to-round appliance...

The DuraTech Adjustable Length is handy when an exact length of chimney is needed but the standard lengths of chimney do not combine to the needed length.  The Adjustable Length spans from...

Use with rear exit appliances and appliances that require a barometric damper.DVL Additional Info:The DVL Double-Wall Stovepipe System is designed to complete the venting process when paired with...