Liners & Pipes

Liners & Pipes

A chimney flue liner or flue pipe is used to line the inside of a chimney or to vent a insert of stove. The liner or pipe serves several important functions, including protecting the chimney from the heat and corrosive gases produced by the fireplace or wood stove, and providing a smooth surface that allows smoke and other combustion byproducts to easily pass through or to the chimney.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Jeremias Trim Collars 6" Slope 0-12 Jeremias Trim Collars 6" Slope 7-12
    Choose Options

    Jeremias Trim Collars

    $104.19 - $125.85
    Enhance the aesthetics of your chimney installation with Jeremias Trim Collars. These high-quality covers provide a decorative finish to your Round or Square ceiling support.
    SKU:
    Jeremias Trim Collars
    Weight:
    0.00 LBS
    $104.19 - $125.85
    Choose Options
    Qty in Cart: 0
    Price:
    $104.19 - $125.85
    Subtotal:
  • Jeremias Roof Flashings 6" Slope 0-12 Jeremias Roof Flashing 6" Flat
    Choose Options

    Jeremias Roof Flashings

    $348.65 - $552.88
    Jeremias Roof Flashings for your "All Fuel, Class A, Factory Built Chimney" establish clearance between your Chimney and Attic insulation. Install where your Chimney passes through an unoccupied attic space.
    SKU:
    Jeremias Roof Flashings
    Weight:
    0.00 LBS
    $348.65 - $552.88
    Choose Options
    Qty in Cart: 0
    Price:
    $348.65 - $552.88
    Subtotal:
  • Jeremias Roof Supports Jeremias Roof Supports, alternate image 1
    Choose Options

    Jeremias Roof Supports

    $161.12 - $161.13
    Jeremias Roof Supports are required when the Jeremias chimney pipe extends out of the roof more than 4’, and support up to 12’ of chimney pipe.
    SKU:
    Jeremias Roof Supports
    Weight:
    0.00 LBS
    $161.12 - $161.13
    Choose Options
    Qty in Cart: 0
    Price:
    $161.12 - $161.13
    Subtotal:
  • Jeremias Radiation Shields Jeremias Radiation Shields 6"
    Choose Options

    Jeremias Radiation Shields

    $130.85 - $161.13
    The Jeremias Radiation Shield is stainless steel and required for ceiling/floor penetrations when a ceiling support is not used but is not required for passing through a roof.
    SKU:
    Jeremias Radiation Shields
    Weight:
    0.00 LBS
    $130.85 - $161.13
    Choose Options
    Qty in Cart: 0
    Price:
    $130.85 - $161.13
    Subtotal:
  • Jeremias Telescopic Roof Brackets Jeremias Telescopic Roof Brackets, alternate image 1
    Choose Options

    Jeremias Telescopic Roof Brackets

    $465.38
    Ensure proper support for your chimney pipe with Jeremias Roof Brackets. Designed for extensions over 4', these brackets can handle up to 12' of chimney pipe and feature telescopic adjustments for various lengths of Jeremias chimney pipe.
    SKU:
    Jeremias Telescopic Roof Brackets
    Weight:
    0.00 LBS
    $465.38
    Choose Options
    Qty in Cart: 0
    Price:
    $465.38
    Subtotal:
  • Jeremias Elbow Kits Jeremias Elbow Kits, 6" by 15 Degree
    Choose Options

    Jeremias Elbow Kits

    $866.25 - $1,235.77
    These Jeremias Elbow Kits are stainless steel, feature locking band design, and are ideal when navigating pipe around obstructions, and offsets. These elbow kits include two (2) elbows and one (1) elbow strap.
    SKU:
    Jeremias Elbow Kits
    Weight:
    0.00 LBS
    $866.25 - $1,235.77
    Choose Options
    Qty in Cart: 0
    Price:
    $866.25 - $1,235.77
    Subtotal:
  • Jeremias Attic Insulation Shields Jeremias Attic Insulation Shields, alternate image 1
    Choose Options

    Jeremias Attic Insulation Shields

    $176.88 - $232.62
    The Jeremias Attic Insulation Shield is stainless steel, extends 9" - 16", and is required for installations when Jeremias passes through an attic. It prevents insulation accumulating near the chimney pipe system
    SKU:
    Jeremias Attic Insulation Shields
    Weight:
    0.00 LBS
    $176.88 - $232.62
    Choose Options
    Qty in Cart: 0
    Price:
    $176.88 - $232.62
    Subtotal:
  • Jeremias Anchor Plates 6" Jeremias Anchor Plates, alternate image 1
    Choose Options

    Jeremias Anchor Plates

    $139.33 - $219.29
    Jeremias Anchor Plates are stainless steel, and connect directly to a masonry fireplace or a factory-built fireplace that’s been listed to use with Jeremias.
    SKU:
    Jeremias Anchor Plates
    Weight:
    0.00 LBS
    $139.33 - $219.29
    Choose Options
    Qty in Cart: 0
    Price:
    $139.33 - $219.29
    Subtotal:
  • Jeremias Chimney Adaptors Jeremias Chimney Adaptors 6"
    Choose Options

    Jeremias Chimney Adaptors

    $76.92 - $102.54
    Transform your chimney system with Jeremias Chimney Adaptors, the ultimate solution for connecting your smoke pipe to your chimney. Engineered with precision and crafted from high-quality materials, these adaptors ensure a secure, efficient, and durable...
    SKU:
    Jeremias Chimney Adaptors
    Weight:
    0.00 LBS
    $76.92 - $102.54
    Choose Options
    Qty in Cart: 0
    Price:
    $76.92 - $102.54
    Subtotal:
  • Jeremias SS Crown Cap with Wire Mesh 6" Jeremias SS Crown Cap with Wire Mesh, alternate image 1
    Choose Options

    Jeremias SS Crown Cap with Wire Mesh

    $275.00 - $330.77
    For durability and protection, try the Jeremias Stainless Steel Chimney Cap, crafted with robust stainless steel and reinforced wire mesh. Engineered to endure harsh weather and maintain optimal airflow, it's your reliable defense against debris and...
    SKU:
    Jeremias SS Crown Cap with Wire Mesh
    Weight:
    6.00 LBS
    $275.00 - $330.77
    Choose Options
    Qty in Cart: 0
    Price:
    $275.00 - $330.77
    Subtotal:
  • 24-Gauge 90-Degree Galvanized Elbow
    Choose Options

    24-Gauge 90-Degree Galvanized Elbow

    $28.99 - $41.99
    Perfect for completing a furnace or hot water heater reline. Avoid re-using old connector pipes—the minimal extra cost ensures a professional finish. The new connector pipe will be the only visible part. Our Galvanized Snap-Lock Pipe is crafted...
    SKU:
    24-Gauge 90-Degree Galvanized Elbow
    Weight:
    2.00 LBS
    $28.99 - $41.99
    Choose Options
    Qty in Cart: 0
    Price:
    $28.99 - $41.99
    Subtotal:
  • 24-Gauge Galvanized Connector Pipe

    24-Gauge Galvanized Connector Pipe

    $33.99 - $37.99
    Ideal for finishing off a furnace or hot water heater reline.  Don't re-use the existing connector pipe!  The incremental cost to finish the reline is minimal.  The new connector pipe is the only thing your customer will see.  Finish...
    SKU:
    24-Gauge Galvanized Connector Pipe
    Weight:
    0.00 LBS
    $33.99 - $37.99
    Qty in Cart: 0
    Price:
    $33.99 - $37.99
    Subtotal:
  • DuraTech Chimney Pipe - Stainless Steel DuraTech Chimney Pipe - Galvalume
    Choose Options

    DuraTech Chimney Pipe

    $78.27 - $751.89
    Designed for appliances of all fuel types, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, pellet, or gas - this is the ideal choice in chimney venting systems. Designed with a...
    SKU:
    DuraTech Chimney Pipe
    Weight:
    0.00 LBS
    $78.27 - $751.89
    Choose Options
    Qty in Cart: 0
    Price:
    $78.27 - $751.89
    Subtotal:
  • DuraTech Finishing Collar DuraTech Finishing Collar, alternate image 1
    Choose Options

    DuraTech Finishing Collar

    $82.39 - $106.08
    New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides...
    SKU:
    DuraTech Finishing Collar
    Weight:
    2.00 LBS
    $82.39 - $106.08
    Choose Options
    Qty in Cart: 0
    Price:
    $82.39 - $106.08
    Subtotal:
  • SS Low Profile Kit 35' - Intake 3"/Exhaust 4"
    Add to Cart

    SS Low Profile Kit 35' - Intake 3"/Exhaust 4"

    $559.99
    The Stainless Steel Low Profile Co-Linear 35' Kit is designed to vent any direct vent/Co-linear cap and flashing, or a high wind Co-linear cap with flashing and one 3" diameter Stainless Steel chimney liner and one 4" diameter Stainless Steel chimney...
    SKU:
    34DVSSBC35
    Weight:
    25.00 LBS
    $559.99
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $559.99
    Subtotal:
  • SS Low Profile Kit 25' - Intake 3"/Exhaust 4"
    Add to Cart

    SS Low Profile Kit 25' - Intake 3"/Exhaust 4"

    $466.99
    The Stainless Steel Low Profile Co-Linear 25' Kit, your solution for efficient venting of direct vent/Co-linear caps or high wind Co-linear caps. This kit includes one 3" diameter stainless steel chimney liner and one 4" diameter stainless steel chimney...
    SKU:
    34DVSSBC25
    Weight:
    25.00 LBS
    $466.99
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $466.99
    Subtotal:
  • SS Low Profile Kit 35' - Intake 3"/Exhaust 3"
    Add to Cart

    SS Low Profile Kit 35' - Intake 3"/Exhaust 3"

    $551.99
    The Low Profile Co-Linear Kit is designed to vent any direct vent/Co-linear cap and flashing, or any high wind Co-linear cap with flashing and two 3" diameter Stainless Steel 35' chimney liners. Also included are EZ clamps for attaching the liner. These...
    SKU:
    33DVSSBC35
    Weight:
    25.00 LBS
    $551.99
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $551.99
    Subtotal:
  • SS Low Profile Kit 25' - Intake 3"/Exhaust 3"
    Add to Cart

    SS Low Profile Kit 25' - Intake 3"/Exhaust 3"

    $458.99
    The Stainless Steel Low Profile Co-Linear Kit is designed to vent any direct vent/Co-linear cap and flashing, or a high wind Co-linear cap with flashing and two 3" diameter Stainless steel chimney liners. Also included are EZ clamps for attaching the...
    SKU:
    33DVSSBC25
    Weight:
    25.00 LBS
    $458.99
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $458.99
    Subtotal:
  • PelletVent Pro Horizontal Caps
    Choose Options

    PelletVent Pro Horizontal Caps

    $65.91 - $72.09
    Designed exclusively for horizontal terminations, the PelletVent Pro Horizontal Cap ensures efficient exhaust direction with its innovative swivel collar. This round cap can be turned at the gore to effectively direct the exhaust output, creating a...
    SKU:
    PelletVent Pro Horizontal Caps
    Weight:
    0.00 LBS
    $65.91 - $72.09
    Choose Options
    Qty in Cart: 0
    Price:
    $65.91 - $72.09
    Subtotal:
  • SmartFlex Two Part Tees - Flex Liner
    Choose Options

    SmartFlex Two Part Tees - Flex Liner

    $83.99 - $270.99
    Our SmartFlex Two Part Tees, crafted from premium 316 or 304 stainless steel are designed for flex liner (316) or rigid pipe and OD liner (304). Featuring an "EZ" band clamp, these tees guarantee mechanical integrity even in extreme heat conditions. 
    SKU:
    SmartFlex Two Part Tees - Flex Liner
    Weight:
    0.00 LBS
    $83.99 - $270.99
    Choose Options
    Qty in Cart: 0
    Price:
    $83.99 - $270.99
    Subtotal:
  • Total: items /

Adding your products to cart