Chimney Pipes
Lindemann Chimney carries a wide range of solid pipe for a variety of applications. Several single and double wall black stovepipe options are available to vent your wood or gas stove. We have top quality pellet vent for your pellet stove and direct vent pipe for your direct vent fireplace. Connector pipe is available in galvanized single wall and B-vent. Whatever your system needs, we have the venting.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
DirectVent Pro Low-Profile Termination Cap (5" X 8")
DirectVent Pro
$192.54Use this cap to terminate a DirectVent Pro installation. Use for vertical terminations only. Check the appliance manufacturer’s instructions to determine which caps are approved for use with their appliance. Available in aluminum.- SKU:
- 279805
- Weight:
- 2.22 LBS
$192.54 -
3" & 3" DirectVent Pro Chimney Liner Termination Kit (4" X 6 5/8")
DirectVent Pro
$295.53Kit includes: Termination Connector and Flashing. DirectVent Pro 4” x 6 5⁄8” Termination Caps, 3” Flex, and Co-Linear Flex Connectors are sold separately. DirectVent Pro chimney liner termination kit must be tested and listed for...- SKU:
- 279231
- Weight:
- 5.56 LBS
$295.53 -
DirectVent Pro Ceiling Firestop (5" x 8")
$26.03Required for multi-story vertical installations at the second floor and any subsequent floors.- SKU:
- 279635
- Weight:
- 1.41 LBS
$26.03 -
Horizontal Wind guard
$232.94DirectVent Pro Chimney Horizontal Wind Guard is designed to prevent wind from affecting the draft in your chimney system. It ensures efficient venting in windy conditions, maintaining optimal performance.- SKU:
- 279112
- Weight:
- 2.78 LBS
$232.94 -
DirectVent Pro Storm Collar (5" x 8")
$28.89Use to maintain a weather tight resistant seal between the pipe and the flashing.- SKU:
- 279535
- Weight:
- 0.55 LBS
$28.89 -
Metal Chimney Conversion Kit
$365.74Metal Chimney Conversion Kit- Fits Security, Metalbestos, Jackes-Evans, Hart & Cooley & Pro Jet- SKU:
- 279001
- Weight:
- 2.54 LBS
$365.74 -
Vinyl Siding Standoff-5" x 8" DirectVent Pro
$177.065" x 8" DirectVent Pro Vinyl Siding Standoff will set the DirectVent Pro Pipe away from the siding to provide clearance to the vinyl siding.- SKU:
- 279505
- Weight:
- 5.00 LBS
$177.06 -
DirectVent Pro Steep Roof Flashing 7/12 - 12/12 (5" x 8")
$198.78Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. For roof pitches of 7⁄12 - 12⁄12. Made of galvalume.- SKU:
- 279436
- Weight:
- 4.10 LBS
$198.78 -
DirectVent Pro Adjustable Roof Flashing 0/12-6/12 (5" x 8")
$112.10Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12 - 6/12. Made of galvalume.- SKU:
- 279435
- Weight:
- 3.67 LBS
$112.10 -
DirectVent Pro Swivel Elbow Galvalume Outer Wall (5"x8"-90?)
$121.50Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°.- SKU:
- 279390
- Weight:
- 3.00 LBS
$121.50 -
Make-A-Clamp Kit- Fasteners (box of 10)
$57.89If you have extra band but ran out of fasteners this is the product you need. The kit includes 10 fasteners to make 10 more clamps with the band you have. 100% stainless steel worm-gear clamp smoothly tightens down for a secure fit. Features: 1/2"...- SKU:
- 391003
- Weight:
- 3.00 LBS
$57.89 -
DirectVent Pro Swivel Elbow Galvalume Outer Wall (5"x8"-45?)
$104.17Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°.- SKU:
- 279345
- Weight:
- 2.45 LBS
$104.17 -
DuraTech Flat Roof Flashing - 8"
DuraTech
$247.78Use to weather proof the penetration of chimney pipe through a flat roof. Storm Collar required.- SKU:
- 287109
- Weight:
- 2.88 LBS
$247.78 -
8" Firestop Dura-Tech Chimney
DuraTech
$125.58Firestop Dura-Tech Chimney-8" can be used in ceiling/floor penetrations when a ceiling support is not used. Fits on underside of ceiling and adjusts to cover framing.- SKU:
- 286008
- Weight:
- 6.74 LBS
$125.58 -
Firestop Dura-Tech Chimney-7"
DuraTech
$114.17Firestop Dura-Tech Chimney-7" can be used in ceiling/floor penetrations when a ceiling support is not used. Fits on underside of ceiling and adjusts to cover framing.- SKU:
- 286007
- Weight:
- 2.32 LBS
$114.17 -
DuraTech Adjustable Roof Support 6" & 8"
DuraTech
$140.32Designed to support the DuraTech Chimney and allows the chimney to pass through the roof and extend down the ceiling. Ideal for cathedral ceilings and free-standing appliance installations. Supports a maximum total chimney length of...- SKU:
- 281609
- Weight:
- 5.40 LBS
$140.32 -
DuraTech Reduced Clearance Support Box-6"
DuraTech
$301.42Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twistlock. Suitable for both flat and cathedral (A-Frame) ceiling applications. Also use in short attic spaces (see instructions)...- SKU:
- 280116
- Weight:
- 12.62 LBS
$301.42 -
DuraTech Spark Arrestor for Termination Cap - 5"-8"
DuraTech
$33.39Use on inside of a DuraTech Termination Cap. Optional Spark Arrestor may be required in some applications.- SKU:
- 280101
- Weight:
- 3.30 LBS
$33.39 -
6" Firestop Dura-Tech Chimney
DuraTech
$102.76Firestop Dura-Tech Chimney-7" can be used in ceiling/floor penetrations when a ceiling support is not used. Fits on underside of ceiling and adjusts to cover framing.- SKU:
- 286006
- Weight:
- 2.32 LBS
$102.76 -
DuraTech Snow Splitter
DuraTech
$222.74This Snow Splitter is constructed with paintable, galvanized material and designed to withstand heavy snow loads, diverting snow around chimney, vent and roof flashing. This product features a bendable attachment flange that allows it to mount on any...- SKU:
- 280100
- Weight:
- 1.25 LBS
$222.74