Description
This sheet metal crimping attachment is designed to work with a minimum 12 volt DC cordless or maximum 7 amp AC corded IMPACT DRIVER. No set up or adjustment is needed. Immediately begin crimping multiple sizes, types, and thicknesses of round metal duct (Including spiral duct and metal stove pipe). It’s also easy to balance while using and stores comfortably in a pouch or bag when not in use.
TurboCrimper IMPACT Sheet Metal Crimping Tool
Impact Driver Requirements: Min 12V DC, Max 7A AC
Chuck Requirements: 1/4 Hex, Quick Release
Net Weight oz(g): 30 (848)
Capacities:
Galvanized Steel 30 – 24 Gauge: .016 – .034 (0.41 – 0.71) Cold Rolled Steel 30 – 24 Gauge: .016 – .034 (0.31 – 0.61)
Impact Driver Requirements: Min 12V DC, Max 7A AC
Chuck Requirements: 1/4 Hex, Quick Release
Net Weight oz(g): 30 (848)
Capacities:
Galvanized Steel 30 – 24 Gauge: .016 – .034 (0.41 – 0.71) Cold Rolled Steel 30 – 24 Gauge: .016 – .034 (0.31 – 0.61)
Technical Specifications
View AllCloseAdditional Product Info
HOW TO USE THE CRIMPERÂ
With the pipe or duct seam in closed position, start the crimp to one side of the seam by gently tugging on the driver trigger and angling the TurboCrimper IMPACT onto the metal edge.Â
Walk the crimper around the pipe circumference in a controlled manner. Last, angle the crimper off the metal as the crimper approaches the other side of the seam.
View AllClose
With the pipe or duct seam in closed position, start the crimp to one side of the seam by gently tugging on the driver trigger and angling the TurboCrimper IMPACT onto the metal edge.Â
Walk the crimper around the pipe circumference in a controlled manner. Last, angle the crimper off the metal as the crimper approaches the other side of the seam.