Liners & Pipes
A chimney flue liner or flue pipe is used to line the inside of a chimney or to vent a insert of stove. The liner or pipe serves several important functions, including protecting the chimney from the heat and corrosive gases produced by the fireplace or wood stove, and providing a smooth surface that allows smoke and other combustion byproducts to easily pass through or to the chimney.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
283012GA
$520.85These elbows are made to help route chimney systems around structural obstacles such as joists, rafters, or ridgepoles. In line with UL 103 standards, only one pair of elbows is allowed for large diameters, and offset angles must stay within a 30° limit...- SKU:
- 283012GA
- Weight:
- 13.98 LBS
$520.85 -
Black Stove Pipe Male Connector- 24-Gauge
$12.98 - $18.64Snap-Lock Black Male Connectors are designed to be used with solid fuel appliances such as wood stoves and join two female ends.- SKU:
- Black Stove Pipe Male Connector- 24-Gauge
- Weight:
- 0.71 LBS
$12.98 - $18.64 -
Black Drawband - 24-Gauge
$26.80 - $31.95Snap-Lock Draw Bands connect Snap-Lock Stovepipe to appliances with flue collars that are slightly larger than the stovepipe. The black finish allows them to blend in with most vent systems.Each piece is shipped with two screws and two nuts.- SKU:
- Black Drawband - 24-Gauge
- Weight:
- 0.85 LBS
$26.80 - $31.95 -
Black No Crimp Increaser/Reducer- 24-Gauge
$30.03 - $33.40Snap-Lock Increaser/Reducer Adapters allow you to connect pipes of different diameters.- SKU:
- Black No Crimp Increaser/Reducer- 24-Gauge
- Weight:
- 0.69 LBS
$30.03 - $33.40 -
Black Tee Cap - 24-Gauge
$15.56 - $23.15Snap-Lock Draw Bands connect Snap-Lock Stovepipe to appliances with flue collars that are slightly larger than the stovepipe. The black finish allows them to blend in with most vent systems.- SKU:
- Black Tee Cap - 24-Gauge
- Weight:
- 0.37 LBS
$15.56 - $23.15 -
Galvanized No Crimp Adapter - 26-Gauge
$13.62 - $22.62Ideal for finishing off a furnace or hot water heater reline. Our Galvanized Snap-Lock Pipe is made of high quality 26 gauge galvanized steel. It snaps together easily. Simply start at one end and the rest of the seam locks together. The Adapter is...- SKU:
- Galvanized No Crimp Adapter - 26-Gauge
- Weight:
- 0.30 LBS
$13.62 - $22.62 -
Galvanized Tee Section - 26-Gauge
$35.49 - $47.59Ideal for finishing off a furnace or hot water heater reline. Don't re-use the existing connector pipe! The incremental cost to finish the reline is minimal. The new connector pipe is the only thing your customer will see. Finish the job off like a...- SKU:
- Galvanized Tee Section - 26-Gauge
- Weight:
- 1.13 LBS
$35.49 - $47.59 -
90 Degree Black Adjustable Elbow - 24-Gauge
$19.52 - $24.86Snap-Lock 24-Gauge Black Elbows adjust from 0 to 90 degrees and are designed to use with Snap-Lock Stovepipe.- SKU:
- 90 Degree Black Adjustable Elbow - 24-Gauge
- Weight:
- 0.95 LBS
$19.52 - $24.86 -
90 Degree Galvanized Adjustable Elbow - 26-Gauge
$8.01 - $16.7226-Gauge 90-Degree Galvanized Elbows are used to make angular turns in round pipe to vent boilers, furnaces and hot water heaters where allowed by code. They have a sturdy galvanized steel construction and are simple to adjust. They are also crimped on...- SKU:
- 90 Degree Galvanized Adjustable Elbow - 26-Gauge
- Weight:
- 2.00 LBS
$8.01 - $16.72 -
45 Degree Galvanized Vent Saddle - 26-Gauge
$18.40 - $29.35Ideal for finishing off a furnace or hot water heater reline. Don't re-use the existing connector pipe! The incremental cost to finish the reline is minimal. The new connector pipe is the only thing you will see. Finish the job off like a...- SKU:
- 45 Degree Galvanized Vent Saddle - 26-Gauge
- Weight:
- 0.59 LBS
$18.40 - $29.35 -
DirectVent Pro - 4" x 6 5/8" Diameter x 36" Concentric Flex Length
$209.44The 3' Concentric Flex offers an affordable alternative to elbows, ideal for maneuvering around obstacles such as studs, joists, or trusses. It ensures precise vent placement, streamlines installation, and reduces the need for additional pipe joints...- SKU:
- 279032
- Weight:
- 3.00 LBS
$209.44 -
24" Galvanized Connector Pipe - 26-Gauge
$8.94 - $18.51Our Galvanized Snap-Lock Pipe is made of high quality 26 gauge galvanized steel. It is manufactured on a coil fed, highly automated line that produces a consistent size. The tapered crimped end ensures that connections fit properly. Ideal for finishing...- SKU:
- 24" Galvanized Connector Pipe - 26-Gauge
- Weight:
- 1.26 LBS
$8.94 - $18.51 -
24" Black Connector Pipe - 24-Gauge
$19.19 - $25.50Snap-Lock wood stove pipe is extremely quick and easy to install with seams that effortlessly snap together and lock in place for a tight hold. Snap-Lock stove pipe is durably constructed of 24-gauge steel and requires an 18" clearance to combustible...- SKU:
- 24" Black Connector Pipe - 24-Gauge
- Weight:
- 2.68 LBS
$19.19 - $25.50 -
DirectVent Pro - 5" x 8" Diameter x 60" Concentric Flex Length
$244.835' Concentric Flex is an affordable alternative to elbows, perfect for navigating around obstacles like studs, joists, or trusses. It ensures precise vent placement and speeds up installation while reducing the number of pipe joints. Save on parts and...- SKU:
- 279323
- Weight:
- 4.00 LBS
$244.83 -
DirectVent Pro - 4" x 6 5/8" Diameter x 60" Concentric Flex Length
$271.27The 5' Concentric Flex provides a cost-effective solution for navigating obstacles like studs, joists, and trusses. It simplifies vent placement, accelerates installation, and minimizes the use of extra pipe joints. Optimize both time and materials by...- SKU:
- 279033
- Weight:
- 4.00 LBS
$271.27 -
DuraTech Chimney Pipe
$81.88 - $1,081.76Designed for appliances of all fuel types, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, pellet, or gas - this is the ideal choice in chimney venting systems. Designed with a...- SKU:
- DuraTech Chimney Pipe
- Weight:
- 2.26 LBS
$81.88 - $1,081.76 -
DuraTech Finishing Collar
$74.85 - $104.71New integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble. Provides...- SKU:
- DuraTech Finishing Collar
- Weight:
- 2.00 LBS
$74.85 - $104.71 -
PelletVent Pro Horizontal Caps
$75.33 - $85.37Designed exclusively for horizontal terminations, the PelletVent Pro Horizontal Cap ensures efficient exhaust direction with its innovative swivel collar. This round cap can be turned at the gore to effectively direct the exhaust output, creating a...- SKU:
- PelletVent Pro Horizontal Caps
- Weight:
- 0.90 LBS
$75.33 - $85.37 -
PelletVent Pro Pipe Extension
$82.54 - $197.64Use to add length to PelletVent Pro pipe. 12” pipe adds 3” - 10” of length, 18” pipe adds 3” - 16” of length, when used with rigid sections of pipe. Galvalume or painted black outer finish. Simply the best Pellet Vent...- SKU:
- PelletVent Pro Pipe Extension
- Weight:
- 1.42 LBS
$82.54 - $197.64 -
DuraTech Extended Roof Bracket - 6" & 8" dia.
$170.45These Extended Roof Brackets are required when the DuraTech chimney pipe extends out of the roof more than 4’. The legs on these roof brackets will extend to handle varying roof slopes and adjust from 67” - 114” lengths. These roof brackets are available...- SKU:
- 282606
- Weight:
- 10.80 LBS
$170.45