Liners & Pipes

Liners & Pipes

A chimney flue liner or flue pipe is used to line the inside of a chimney or to vent a insert of stove. The liner or pipe serves several important functions, including protecting the chimney from the heat and corrosive gases produced by the fireplace or wood stove, and providing a smooth surface that allows smoke and other combustion byproducts to easily pass through or to the chimney.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Galvanized Tee Section - 26-Gauge
    Choose Options

    Galvanized Tee Section - 26-Gauge

    $55.76 - $74.78
    Ideal for finishing off a furnace or hot water heater reline.  Don't re-use the existing connector pipe!  The incremental cost to finish the reline is minimal.  The new connector pipe is the only thing your customer will see.  Finish the job off like a...
    SKU:
    Galvanized Tee Section - 26-Gauge
    Weight:
    1.13 LBS
    $55.76 - $74.78
    Choose Options
    Qty in Cart: 0
    Price:
    $55.76 - $74.78
    Subtotal:
  • 90 Degree Galvanized Adjustable Elbow - 26-Gauge
    Choose Options

    90 Degree Galvanized Adjustable Elbow - 26-Gauge

    $12.69 - $33.11
    26-Gauge 90-Degree Galvanized Elbows are used to make angular turns in round pipe to vent boilers, furnaces and hot water heaters where allowed by code. They have a sturdy galvanized steel construction and are simple to adjust. They are also crimped on...
    SKU:
    90 Degree Galvanized Adjustable Elbow - 26-Gauge
    Weight:
    2.00 LBS
    $12.69 - $33.11
    Choose Options
    Qty in Cart: 0
    Price:
    $12.69 - $33.11
    Subtotal:
  • 45 Degree Galvanized Vent Saddle - 26-Gauge
    Choose Options

    45 Degree Galvanized Vent Saddle - 26-Gauge

    $32.25 - $46.50
    Ideal for finishing off a furnace or hot water heater reline.  Don't re-use the existing connector pipe!  The incremental cost to finish the reline is minimal.  The new connector pipe is the only thing you will see.  Finish the job off like a...
    SKU:
    45 Degree Galvanized Vent Saddle - 26-Gauge
    Weight:
    0.59 LBS
    $32.25 - $46.50
    Choose Options
    Qty in Cart: 0
    Price:
    $32.25 - $46.50
    Subtotal:
  • 24" Galvanized Connector Pipe - 26-Gauge
    Choose Options

    24" Galvanized Connector Pipe - 26-Gauge

    $21.46 - $33.64
    Our Galvanized Snap-Lock Pipe is made of high quality 26 gauge galvanized steel.  It is manufactured on a coil fed, highly automated line that produces a consistent size.  The tapered crimped end ensures that connections fit properly. Ideal for finishing...
    SKU:
    24" Galvanized Connector Pipe - 26-Gauge
    Weight:
    1.26 LBS
    $21.46 - $33.64
    Choose Options
    Qty in Cart: 0
    Price:
    $21.46 - $33.64
    Subtotal:
  • B-Vent 90? Adjustable Elbow
    Choose Options

    B-Vent 90° Adjustable Elbow

    $74.57 - $162.97
    90° Adjustable Elbow for Class B gas appliance venting system. The elbow is made of Galvalume steel a combination of aluminum and galvanized steel that provides enhanced durability and lifespan. Elbows (3” - 8”) swivel 360° at base. 90° Elbow is...
    SKU:
    B-Vent Elbows - 90 Degree
    Weight:
    1.40 LBS
    $74.57 - $162.97
    Choose Options
    Qty in Cart: 0
    Price:
    $74.57 - $162.97
    Subtotal:
  • PelletVent Pro Adapter Tee with Cleanout Tee Cap PelletVent Pro Adapter Tee with Cleanout Tee Cap, alternate image 1
    Choose Options

    PelletVent Pro Adapter Tee with Cleanout Tee Cap

    $144.98 - $197.22
    The Single Tee & Cleanout Tee Cap is used for 90° offsets, it includes a removable, twist-lock Cleanout Tee Cap. Cleanout Tee Caps are tight fitting by design, can be removed with a strap wrench or rubber gloves, and can be purchased as a replacement...
    SKU:
    PelletVent Pro Adapter Tee with Cleanout Tee Cap
    Weight:
    1.80 LBS
    $144.98 - $197.22
    Choose Options
    Qty in Cart: 0
    Price:
    $144.98 - $197.22
    Subtotal:
  • PelletVent Pro Tee Cap PelletVent Pro Tee Cap, alternate image 1
    Choose Options

    PelletVent Pro Tee Cap

    $63.40 - $77.86
    The PelletVent Pro Tee Cap is a replacement for your clean-out tee. Designed for a secure fit, this new cap ensures a tight seal. For easy removal, we recommend using rubber gloves or a strap wrench. Built for durability and convenience, it's a reliable...
    SKU:
    PelletVent Pro Tee Cap
    Weight:
    0.48 LBS
    $63.40 - $77.86
    Choose Options
    Qty in Cart: 0
    Price:
    $63.40 - $77.86
    Subtotal:
  • PelletVent Pro Wall Thimble PelletVent Pro Wall Thimble, alternate image 1
    Choose Options

    PelletVent Pro Wall Thimble

    $107.89 - $116.79
    The PelletVent Pro Wall Thimble is designed for through-the-wall installations, providing a secure and efficient passage for your vent pipe. This thimble is engineered to fit perfectly between standard wall studs, ensuring a precise and stable...
    SKU:
    PelletVent Pro Wall Thimble
    Weight:
    2.75 LBS
    $107.89 - $116.79
    Choose Options
    Qty in Cart: 0
    Price:
    $107.89 - $116.79
    Subtotal:
  • SmartFlex Stove Adapter, 304 Stainless Steel
    Choose Options

    SmartFlex Stove Adapter, 304 Stainless Steel

    $23.99 - $36.99
    The SmartFlex Stove Adapter is made with 304, stainless steel and allows you to quickly and easily attach a stainless steel chimney liner to the fireplace insert using its "EZ" band clamp. This stove adapter can also connect to a stainless steel...
    SKU:
    SmartFlex Stove Adapter, 304 Stainless Steel
    Weight:
    0.00 LBS
    $23.99 - $36.99
    Choose Options
    Qty in Cart: 0
    Price:
    $23.99 - $36.99
    Subtotal:
  • B-Vent Roof Flashing
    Choose Options

    B-Vent Roof Flashing

    $28.61 - $111.23
    These Roof Flashings for Type B Gas Vent are made with galvalume, and used to weather proof the vent pipe that reaches past the roof. Available in either adjustable or steep designs, the Adjustable Roof Flashing has a range from 0/12 (flat) to 6/12,...
    SKU:
    B-Vent Roof Flashing
    Weight:
    1.99 LBS
    $28.61 - $111.23
    Choose Options
    Qty in Cart: 0
    Price:
    $28.61 - $111.23
    Subtotal:
  • B-Vent Tee Cap B-Vent Tee Cap, alternate image 1
    Choose Options

    B-Vent Tee Cap

    $13.34 - $22.24
    Use to cap Standard Tee or Increaser Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate from the common vent. Fits on inner liner.Additional B-Vent Info:DuraVent's Type B Gas Vent system features the innovative DuraLock...
    SKU:
    B-Vent Tee Cover
    Weight:
    0.08 LBS
    $13.34 - $22.24
    Choose Options
    Qty in Cart: 0
    Price:
    $13.34 - $22.24
    Subtotal:
  • B-Vent Tee B-Vent Tee, alternate image 1
    Choose Options

    B-Vent Tee

    $66.73 - $97.86
    Use for a 90° offset or to combine connectors from two or more appliances into a common vent. Branch swivels for alignment. 3” - 8” feature swivel on male end. Additional B-Vent Info:DuraVent's Type B Gas Vent system features the innovative DuraLock...
    SKU:
    B-Vent Tee
    Weight:
    1.49 LBS
    $66.73 - $97.86
    Choose Options
    Qty in Cart: 0
    Price:
    $66.73 - $97.86
    Subtotal:
  • PelletVent Pro Appliance Adapter
    Choose Options

    PelletVent Pro Appliance Adapter

    $31.14 - $88.98
    The PelletVent Pro Appliance Adapter is designed to ensure a secure and seamless connection between your pellet stove and the venting system. This adapter simplifies the installation process by attaching directly to the appliance outlet, allowing for...
    SKU:
    PelletVent Pro Appliance Adapter
    Weight:
    0.50 LBS
    $31.14 - $88.98
    Choose Options
    Qty in Cart: 0
    Price:
    $31.14 - $88.98
    Subtotal:
  • PelletVent Pro Double Tee
    Choose Options

    PelletVent Pro Double Tee

    $333.71
    The pellet vent double tee is used for clean out access for both vertical and horizontal installations. This product should be used for a 90 degree offset. Branch swivels for alignment. The double tee one-piece unit uses a removable twist-lock clean-out...
    SKU:
    PelletVent Pro Double Tee
    Weight:
    1.80 LBS
    $333.71
    Choose Options
    Qty in Cart: 0
    Price:
    $333.71
    Subtotal:
  • B-Vent Universal Adapter B-Vent Universal Adapter, alternate image 1
    Choose Options

    B-Vent Universal Adapter

    $22.99 - $144.60
    B-Vent Male AdapterUse to connect DuraFlex AL to DuraVent Type B Gas Vent products.B-Vent Female AdapterUse to connect DuraVent Type B Gas Vent products to DuraFlex AL. Additional B-Vent Info:DuraVent's Type B Gas Vent system features the innovative...
    SKU:
    B-Vent Universal Adapter
    Weight:
    0.82 LBS
    $22.99 - $144.60
    Choose Options
    Qty in Cart: 0
    Price:
    $22.99 - $144.60
    Subtotal:
  • B-Vent 45?/60? Adjustable Elbows B-Vent 45?/60? Adjustable Elbows, alternate image 1
    Choose Options

    B-Vent 45°/60° Adjustable Elbows

    $44.01 - $111.23
    Offsets obstructions as needed. Elbows swivel 360° at base. 45°/60° Elbow is adjustable from 0° to 60°. Elbows must be supported when installed. Additional B-Vent Info: DuraVent's Type B Gas Vent system features the innovative...
    SKU:
    B-Vent Elbows
    Weight:
    1.18 LBS
    $44.01 - $111.23
    Choose Options
    Qty in Cart: 0
    Price:
    $44.01 - $111.23
    Subtotal:
  • PelletVent Pro Storm Collar
    Choose Options

    PelletVent Pro Storm Collar

    $9.77 - $14.45
    The PelletVent Pro Storm Collar provides a weather tight seal between the pipe and the flashing. PelletVent Pro is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built to vent corn and other biofuel...
    SKU:
    PelletVent Pro Storm Collar
    Weight:
    0.29 LBS
    $9.77 - $14.45
    Choose Options
    Qty in Cart: 0
    Price:
    $9.77 - $14.45
    Subtotal:
  • PelletVent Pro Adjustable Flashing
    Choose Options

    PelletVent Pro Adjustable Flashing

    $40.04 - $44.49
    The PelletVent Pro Adjustable Flashing is used to weather proof the penetration of vent pipe through the roof. Roof flashing is selected based on the pitch of the roof, this flashing is for pitches 0/12 - 6/12. Storm collar required.PellentVent Pro...
    SKU:
    PelletVent Pro Adjustable Flashing
    Weight:
    1.96 LBS
    $40.04 - $44.49
    Choose Options
    Qty in Cart: 0
    Price:
    $40.04 - $44.49
    Subtotal:
  • B-Vent Storm Collar B-Vent Storm Collar, alternate image 1
    Choose Options

    B-Vent Storm Collar

    $6.66 - $12.23
    Use to maintain a weather tight resistant seal between the pipe and the flashing. Seal inner edge with hi-temp silicone sealant.Additional B-Vent Info:DuraVent's Type B Gas Vent system features the innovative DuraLock technology, ensuring a secure...
    SKU:
    Storm Collar
    Weight:
    0.28 LBS
    $6.66 - $12.23
    Choose Options
    Qty in Cart: 0
    Price:
    $6.66 - $12.23
    Subtotal:
  • B-Vent Drafthood Connector B-Vent Drafthood Connector, alternate image 1
    Choose Options

    B-Vent Drafthood Connector

    $35.59 - $72.30
    Use to connect appliance or single-wall connector to vent system. Additional B-Vent Info: DuraVent's Type B Gas Vent system features the innovative DuraLock technology, ensuring a secure connection. With alignment indicators, you can...
    SKU:
    B-Vent Drafthood Connector
    Weight:
    0.50 LBS
    $35.59 - $72.30
    Choose Options
    Qty in Cart: 0
    Price:
    $35.59 - $72.30
    Subtotal:
  • Total: items /

Adding your products to cart