Sale

Use to transition between PelletVent Pro to existing chimney such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble, for 6”, use adapter 6DVL-ADC or 6DVL-ADT, for 8”, use adapter...

Use to transition between PelletVent Pro to existing chimney such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble, for 6”, use adapter 6DVL-ADC or 6DVL-ADT, for 8”, use adapter...

Decorative cover for ceiling support boxes and wall thimbles. Painted black. Use with reduction collar.PellentVent Pro Info:PelletVent Pro is a versatile venting system specifically designed for stoves and inserts that burn wood pellets and oil fuel. It...

The Retrieving Tool, w/universal thread, makes removing bird nests and brushes stuck in the flue, a whole lot easier. Simply turn the rod and it will screw into the brush or nest so you can extract it. It features rust resistant brass European threads...

The PelletVent Pro 3" Wall Thimble Air Intake Kit is a comprehensive solution designed to ensure efficient air intake for your pellet stove. This kit includes a 2" flexible pipe, facilitating easy installation through an exterior wall. It is built to...

The Harpoon with universal thread is a very handy tool for removing blockages, foreign objects and chipping at creosote, particularly at corners. It features rust resistant brass European threads which connect it to large universal thread poly rods.

Use to connect PelletVent Pro to the bottom of BioFlex when relining a masonry chimney. Only approved for use with BioFlex.PellentVent Pro Info:PelletVent Pro is a versatile venting system specifically designed for stoves and inserts that burn wood...

Use this "U" shaped brush with ¼" heavy wire for cleaning corners of the smoke chamber. Be sure to use it with adapter (509200) and rod (503032) for best results

Use to transition between PelletVent Pro to existing chimney such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble, for 6”, use adapter 6DVL-ADC or 6DVL-ADT, for 8”, use adapter...

This Inlet Dust Seal to Cover Hose Inlet is for use with the RoVac one or three motor chimney and dryer vent vacuum.

Use to transition between PelletVent Pro to existing chimney such as DuraTech, DuraPlus or DuraPlus HTC. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble, for 6”, use adapter 6DVL-ADC or 6DVL-ADT, for 8”, use adapter...

This 14" Lint Brush with wood handle is for cleaning front door lint traps.

Use for a 90° offset. Attaches directly to appliance as an adapter. Converts a 3” appliance to a 4” PelletVent Pro system. One piece unit incorporates removable twist-lock Clean-Out Tee Cap.PellentVent Pro Info:PelletVent Pro is a versatile venting...

Fits over the female end of the chimney pipe to provide a decorative black finish. Use on chimney pipe that is suspended with the roof support system or on pipe that is passing through a wall thimble.DuraTech Additional Info:Featuring thermal blanket...

This Power Cord is for use with the RoVac three-motor chimney and dryer vent vacuum.

The 4" ID x 10' chimney cleaning hose is for use with the RoVac three-motor chimney and dryer vent vacuum.

The Support Wire for Styro-Forms comes in a bag of 6 and can be used with 8" or 12" Styro-Form Support Triangles.

This Fiberglass Insulation (1.5" X 10' adhesive back) has pressure sensitive adhesive backing. Peel off backing and apply to the back of the fireplace insert flange to seal space.

Starter Rod measuring 3/8"x32". The Torque Lock Connector Rods have a ridge on the top of the rod, at the far left. There is a groove in the bottom of the female end just to the right of this rod. This provides added security to prevent the rods from...

This Drill Adapter is designed for ES Brushes.