Liners & Pipes
A chimney flue liner or flue pipe is used to line the inside of a chimney or to vent a insert of stove. The liner or pipe serves several important functions, including protecting the chimney from the heat and corrosive gases produced by the fireplace or wood stove, and providing a smooth surface that allows smoke and other combustion byproducts to easily pass through or to the chimney.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Telescoping Length w/Trim 6" DuraBlack
$164.27Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. Adjusts from 44” - 68”. No cutting required.DuraBlack Additional Info:For a cost-effective,...- SKU:
- 194406
- Weight:
- 6.99 LBS
$164.27 -
DirectVent Pro Prairie Co-Linear Kit & Flex - 3" / 4"
$653.64Use when installing a direct vent co-linear insert into a masonry chimney.Kit includes:Prairie Termination Cap; and two pieces of 4" x 35' Aluminum Flex lengths - one Red (exhaust), and one Green...- SKU:
- 279234
- Weight:
- 26.00 LBS
$653.64 -
DirectVent Pro High Wind Termination Cap (5" x 8")
$167.47Use for vertical terminations only. Provides improved performance in high wind conditions. For vertical terminations only. Available in aluminum.DirectVent Pro Additional Info:DirectVent Pro offers...- SKU:
- 279915
- Weight:
- 2.80 LBS
$167.47 -
10" X10" Sq Bottom Plate 1818
$115.25Designed to connect to a 10" x 10" square liner, our Square Bottom Plate features a sturdy 18-gauge 304 stainless steel base plate measuring 18" x 18" and a 1-inch high collar crafted from 24-gauge...- SKU:
- NC1010BP1818
- Weight:
- 3.50 LBS
$115.25 -
Aluminum Foil Tape-3" x 150'
$35.68Aluminum Foil Tape is a pressure-sensitive tape manufactured with a nominal 2 mil aluminum foil backing and a performance adhesive system. The tape assures the integrity of the insulation system...- SKU:
- 391200
- Weight:
- 2.00 LBS
$35.68 -
DirectVent Standard Co-Axial to CoLinear Adapter (4"X6 5/8")
$270.06Use Co-Linear Adapter for stoves with 4” X 6 5⁄8” co-axial outlets. Refer to appliance manufacturer’s installation instructions for approval. Uses aluminum flex for both intake and exhaust.DirectVent...- SKU:
- 279233
- Weight:
- 2.80 LBS
$270.06 -
DirectVent Pro Horizontal Square Termination Cap (5" x 8")
$395.39Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors...- SKU:
- 279845
- Weight:
- 6.00 LBS
$395.39 -
10" X10" Sq Bottom Plate 1318
$87.48Crafted to connect seamlessly with a 10" x 10" square liner, our Square Bottom Plate includes a sturdy 18-gauge 304 stainless steel 13" x 18" base plate and a 1-inch high collar made from 24-gauge...- SKU:
- NC1010BP1318
- Weight:
- 3.50 LBS
$87.48 -
DirectVent Pro Low-Profile Termination Cap (5" X 8")
$190.98Complete your DirectVent Pro installation with this cap, designed specifically for vertical terminations. Be sure to consult the appliance manufacturer's guidelines to ensure compatibility with...- SKU:
- 279805
- Weight:
- 2.22 LBS
$190.98 -
3" & 3" DirectVent Pro Chimney Liner Termination Kit (4" X 6 5/8")
$293.13Kit includes:Termination Connector and Flashing. DirectVent Pro 4” x 6 5⁄8” Termination Caps, 3” Flex, and Co-Linear Flex Connectors are sold separately. DirectVent Pro chimney liner termination kit...- SKU:
- 279231
- Weight:
- 5.56 LBS
$293.13 -
10"X10" Sq Bottom Plate
$69.13Designed to seamlessly connect with a square 10" x 10" liner, the Square Bottom Plate, featuring a sturdy 18-gauge 304 Stainless Steel 13" x 13" base plate and a 1-inch high collar crafted from...- SKU:
- NC1010BP
- Weight:
- 3.00 LBS
$69.13 -
DirectVent Pro Ceiling Firestop (5" x 8")
$25.82Directvent Pro Ceiling Firestop for 5" x 8" pipe is essential for multi-story vertical installations, required at the second floor and all additional floors. DirectVent Pro Additional Info:DirectVent...- SKU:
- 279635
- Weight:
- 1.41 LBS
$25.82 -
DirectVent Pro Storm Collar (5" x 8")
$28.49Use to maintain a weather tight resistant seal between the pipe and the flashing.DirectVent Pro Additional Info: DirectVent Pro offers superior performance with its tight inner connections,...- SKU:
- 279535
- Weight:
- 0.60 LBS
$28.49 -
8" Id Ov To 7" To 8" Rd Adapter 316 Stainless
$157.67This adapter changes a 7" oval to an 8" round connection, tailored for ovalized liners with inside diameter (ID). It includes a crimped round end for straightforward installation and is crafted from...- SKU:
- NC87OVRDL
- Weight:
- 2.00 LBS
$157.67 -
Metal Chimney Conversion Kit
$362.78Kit includes: Cap Adapter and a Retro Connector. DirectVent Pro 4” x 6 5⁄8” Termination Cap and 4” flex are sold separately. Use with 4” x 6 5⁄8” direct vent gas stoves. Use existing...- SKU:
- 279001
- Weight:
- 2.54 LBS
$362.78 -
8" Id Ov To 7" To 8" Rd Adapter
$135.91Converts a 7" oval to an 8" round connection. Designed for ovalized liners with inside diameter (ID), featuring a crimped round end for easy installation. Crafted from robust 304 stainless steel.- SKU:
- NC87OVRD
- Weight:
- 2.00 LBS
$135.91 -
Vinyl Siding Standoff-5" x 8" DirectVent Pro
$175.63Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and or melting of the material. Use only on horizontal terminations and on any...- SKU:
- 279505
- Weight:
- 5.40 LBS
$175.63 -
8" Id Ov To 6" To 8" Rd Adapter 316 Stainless
$157.67This adapter changes a 6" oval to an 8" round connection. The oval end is made to fit ovalized inside diameter (ID) liners, and the crimped round end ensures easy installation. Constructed from 316...- SKU:
- NC86OVRDL
- Weight:
- 3.00 LBS
$157.67 -
DirectVent Pro Steep Roof Flashing 7/12 - 12/12 (5" x 8")
$196.02Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. For roof pitches of 7⁄12 - 12⁄12. Made of galvalume.DirectVent Pro Additional Info: DirectVent Pro offers...- SKU:
- 279436
- Weight:
- 3.80 LBS
$196.02 -
DirectVent Pro Adjustable Roof Flashing 0/12-6/12 (5" x 8")
$111.19Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12 - 6/12. Made of galvalume. DirectVent Pro...- SKU:
- 279435
- Weight:
- 3.67 LBS
$111.19