Gas Vent Pipe
DuraVent's innovative system for a lock-tight connection for Type B Gas Vent called DuraLock. See the alignment indicators meet; feel the ends grasp together; hear the snap as the connection firmly locks into place. DuraVent Type B Gas Vent is designed to meet the rugged demands of the job site. The inner wall is recessed to eliminate damage in handling. Type B Gas Vent has been engineered to heat up rapidly. It remains hot during the operation of the appliance with minimal condensation in the appliance and vent system. Pipe lengths are available in multiple lengths, 6 to 60 inches, with a full complement of adjustable and rigid fittings. Type B gas vents are not suitable for use with wood-burning or coal applications, industrial ovens, exhaust ranges and hoods, grease or pollution ducting, or as free-standing exhaust vents for high-temperature applications.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
DirectVent Pro High-Wind Co-Linear Kit & Flex (3")
DirectVent Pro
$600.69Use when installing a direct vent, co-linear insert into a masonry chimney. Kit includes: High-Wind Termination; and two pieces of Aluminum Flex lengths - one Red (exhaust), and one Green (air intake). See chart for diameters and lengths.- SKU:
- 279235
- Weight:
- 22.00 LBS
$600.69 -
DirectVent Pro Prairie Co-Linear Kit & Flex - 3" / 4"
DirectVent Pro
$662.83Use when installing a direct vent co-linear insert into a masonry chimney.Kit includes: Prairie Termination Cap; and two pieces of Aluminum Flex lengths - one Red (exhaust), and one Green (air intake). See chart for diameters and lengths.- SKU:
- 279234
- Weight:
- 2.62 LBS
$662.83 -
DirectVent Pro High Wind Termination Cap (5" x 8")
DirectVent Pro
$168.84Use for vertical terminations only. Provides improved performance in high wind conditions. For vertical terminations only. Available in aluminum.- SKU:
- 279915
- Weight:
- 2.80 LBS
$168.84 -
DirectVent Standard Co-Axial to CoLinear Adapter (4"X6 5/8")
DirectVent Pro
$273.86Use Co-Linear Adapter for stoves with 4” X 6 5⁄8” co-axial outlets. Refer to appliance manufacturer’s installation instructions for approval. Uses aluminum flex for both intake and exhaust.- SKU:
- 279233
- Weight:
- 2.60 LBS
$273.86 -
DirectVent Pro Horizontal Square Termination Cap (5" x 8")
DirectVent Pro
$400.95Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Available in aluminum, stainless steel (S), and copper (C).Cap...- SKU:
- 279845
- Weight:
- 5.40 LBS
$400.95 -
DirectVent Pro Low-Profile Termination Cap (5" X 8")
DirectVent Pro
$192.54Use this cap to terminate a DirectVent Pro installation. Use for vertical terminations only. Check the appliance manufacturer’s instructions to determine which caps are approved for use with their appliance. Available in aluminum.- SKU:
- 279805
- Weight:
- 2.22 LBS
$192.54 -
DirectVent Pro Ceiling Firestop (5" x 8")
$26.03Required for multi-story vertical installations at the second floor and any subsequent floors.- SKU:
- 279635
- Weight:
- 1.41 LBS
$26.03 -
DirectVent Pro Storm Collar (5" x 8")
$28.89Use to maintain a weather tight resistant seal between the pipe and the flashing.- SKU:
- 279535
- Weight:
- 0.55 LBS
$28.89 -
Vinyl Siding Standoff-5" x 8" DirectVent Pro
$177.065" x 8" DirectVent Pro Vinyl Siding Standoff will set the DirectVent Pro Pipe away from the siding to provide clearance to the vinyl siding.- SKU:
- 279505
- Weight:
- 5.00 LBS
$177.06 -
DirectVent Pro Steep Roof Flashing 7/12 - 12/12 (5" x 8")
$198.78Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. For roof pitches of 7⁄12 - 12⁄12. Made of galvalume.- SKU:
- 279436
- Weight:
- 4.10 LBS
$198.78 -
DirectVent Pro Adjustable Roof Flashing 0/12-6/12 (5" x 8")
$112.10Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12 - 6/12. Made of galvalume.- SKU:
- 279435
- Weight:
- 3.67 LBS
$112.10 -
DirectVent Pro Swivel Elbow Galvalume Outer Wall (5"x8"-90?)
$121.50Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°.- SKU:
- 279390
- Weight:
- 3.00 LBS
$121.50 -
DirectVent Pro Swivel Elbow Galvalume Outer Wall (5"x8"-45?)
$104.17Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°.- SKU:
- 279345
- Weight:
- 2.45 LBS
$104.17 -
DirectVent Pro Adjustable Pipe
DirectVent Pro
$86.21 - $511.34DirectVent Pro features tight interior connections for superior performance, with no gaskets or sealants needed (unless specified by the appliance manufacturer). All black pipe lengths, extensions, and elbows feature a laser-welded outer wall. Laser...- SKU:
- DirectVent Pro Adjustable Pipe
- Weight:
- 0.00 LBS
$86.21 - $511.34 -
DirectVent Pro Wall Thimble (4? x 6 5?8?)
$86.43Installing a direct vent chimney through a combustible wall is simple with this Vent Pro vent pipe wall thimble by Dura-Vent. This chimney pipe thimble acts as a wall pass-through and firestop for direct vent piping for vent pipes with a 4 in...- SKU:
- DirectVent Pro Wall Thimble
- Weight:
- 0.00 LBS
$86.43 -
B-Vent Adjustable Gas Pipe
B-Vent
$27.10 - $63.81Use to add length to a straight length of Type B Gas Vent. 12” adds 3” - 10” of length, 18” adds 10” - 16” of length. Requires a 2” overlap.ApplicationsDuraVent’s Type B Gas Vent system. Use with natural gas or...- SKU:
- Type B Gas Vent Adjustable Pipe
- Weight:
- 1.30 LBS
$27.10 - $63.81 -
B-Vent Pipe (Trim) Collar
$8.51 - $17.50This trim collar is used for decorative purposes to make the installation have a clean and professional appearance. While it is optional, it is recommended to complete the system.Applications:DuraVent’s Type B Gas Vent system. Use with natural gas or...- SKU:
- B-Vent Pipe (Trim) Collar
- Weight:
- 0.00 LBS
$8.51 - $17.50 -
B-Vent Wall Thimble
$38.70 - $65.38Use for through-the-wall system to provide clearances for vent from combustibles. Adjusts from 3½” to 6” to accommodate various wall thicknesses. Larger diameter wall thimbles are field-fabricated. (See local codes for guidelines.)Applications:DuraVent’s...- SKU:
- B-Vent Wall Thimble
- Weight:
- 0.00 LBS
$38.70 - $65.38 -
B-Vent Firestop Support
$25.14 - $74.00Use to support vent at ceiling level. Includes clamp that supports and prevents pipe sections from slipping down. Provides the mandatory 1” clearance to combustibles. Straps extend 16”.Applications:DuraVent’s Type B Gas Vent system. Use with natural gas...- SKU:
- B-Vent Firestop Support
- Weight:
- 0.00 LBS
$25.14 - $74.00 -
B-Vent Firestop
$14.49 - $51.44Use at every ceiling level where Square Firestop Support is not used. 3” - 6” style shown in left photo. 7” - 12” style shown in right photo.Applications:DuraVent’s Type B Gas Vent system. Use with natural gas or liquid propane category I and draft hood...- SKU:
- B-Vent Firestop
- Weight:
- 0.00 LBS
$14.49 - $51.44