DirectVent Pro Low Profile Termination Cap (4" X 6 5/8")

(No reviews yet) Write a Review
SKU:
279800
  • DirectVent Pro Low Profile Termination Cap (4" X 6 5/8")
  • DirectVent Pro Low Profile Termination Cap (4" X 6 5/8"), alternate image 1
$129.99

Description

Use this cap to terminate a DirectVent Pro installation. Use for vertical terminations only. Check the appliance manufacturer’s instructions to determine which caps are approved for use with their appliance. Available in aluminum.

DirectVent Pro Additional Info: 

DirectVent Pro offers superior performance with its tight inner connections, eliminating the need for gaskets or sealants (unless required by the appliance manufacturer). The black pipe lengths, extensions, and elbows showcase laser-welded outer wall seams for a smooth, refined finish. The low-profile locks, free of hems or beads, provide an elegant appearance that enhances any interior. Trusted & specified by nearly every major stove and fireplace manufacturer in the U.S. and Canada, DuraVent’s direct vent system also has one of the widest selection of termination caps available.

Materials and Construction:

.020” aluminum inner wall. .018” galvanized steel outer wall. Painted outer walls made of laser welded .018” galvalume steel. Caps also available in stainless steel and copper. Outer pipe brings combustion air to the appliance. Inner pipe exhausts flue gases to the outside.  Gaskets or sealants not required (unless specified by the appliance manufacturer).  

Clearances:  Specified by the appliance manufacturer.  

Diameters:  4” x 6 5⁄8” and 5” x 8”.  

Listings:  

DirectVent Pro, in combination with the gas appliance, has been tested and listed as a decorative gas appliance system or as a direct vent heater system by a major testing agency, such as UL, CSA, or Warnock Hersey. Check with your appliance manufacturer for approval.

View AllClose

Technical Specifications

View AllClose

Additional Product Info

View AllClose

0 Reviews

View AllClose