AW Perkins 500° Silicone Sealant

(No reviews yet) Write a Review
SKU:
AW Perkins 500° Silicone Sealant
  • AW Perkins 500° Silicone Sealant
  • AW Perkins 500° Silicone Sealant, alternate image 1
$17.65

Description

This silicone is a high-performing, neutral cure silicone, offering excellent adhesion to most plastics, metals, and glass including top plates, storm collars, and more. It’s fast curing, contains no solvents, and is non-corrosive. It does not shrink or harden. Available in a convenient 10.3 ounce cartridges in  either black or clear.

Directions:
  1. Surface must be clean and dry. Use acetone to degrease and improve adhesion. 
  2. Remove cap, cut nozzle tip to size.
  3. Puncture inner seal and place cartridge in a standard caulking gun. 
  4. Apply by pushing sealant ahead of nozzle for best adhesion.
  5. Tool immediately for best results.
  6. Tack-free in minutes and fully cured in most applications within 24 hours. 
  7. Clean up spills without smearing by using a spatula or putty knife.
  8. To best save remaining silicone replace cap after filling it with sealant. 
View AllClose

Technical Specifications

View AllClose

0 Reviews

View AllClose